VISION – Status display

Emitter – VISION V, VISION VXL, VISION MXL

1 Yellow LED	2 Red LED	3 Green LED	Meaning
⊗	⊗	⊗	System power-on – Initial TEST
⊗	⊗	⊗	TEST condition
⊗	⊗	⊗	GUARD condition. Low range

Emitter – VISION VX

1 Yellow LED	2 Red LED	3 Green LED	Display	Meaning
⊗	⊗	⊗	8	System power-on – Initial TEST
⊗	⊗	⊗	L / H	TEST condition
⊗	⊗	⊗	L	GUARD condition. Low range
⊗	⊗	⊗	H	GUARD condition. High range
⊗	⊗	⊗	CODE	FAIL condition – The type of fault is identified by the code number on display. See next “fail condition table”

Fail condition

Display code	Meaning
F – P	Range selection incorrect or modified
F – A	Internal error (add-on board)
F – 3	Internal error (master board)
F – 4	Internal error

 

Receiver – VISION V, VISION VXL

1 Yellow LED	2 Red LED	3 Green LED	4 OSSD FAIL LED	Meaning
⊗	⊗	⊗	⊗	System power-on – Initial TEST
⊗ Blinking	⊗	⊗	⊗	Manual/automatic restart with feedback enabled/disabled. (VISION VXL models only)
⊗	⊗	⊗	⊗	BREAK condition
⊗	⊗	⊗	⊗	Received beam signal intensity is weak
⊗	⊗	⊗	⊗	GUARD condition

Receiver – VISION VX

1 Yellow LED	2 Red LED	3 Green LED	Display	Meaning
⊗	⊗	⊗	8	System power-on – Initial TEST
⊗	⊗	⊗	C	C displayed for 10 sec. – Manual restart with feedback disabled (not for slave models)
⊗	⊗	⊗	C	C displayed for 10 sec. – Manual restart with feedback enabled (not for slave models)
⊗	⊗	⊗	C	C displayed for 10 sec. – Automatic restart with feedback disabled (not for slave models)
⊗	⊗	⊗	C	C displayed for 10 sec. – Automatic restart with feedback enabled (not for slave models)
⊗	⊗	⊗	–	BREAK condition
⊗	⊗	⊗	D	BREAK condition with weak signal
⊗	⊗	⊗	–	CLEAR condition. Waiting for restart (not for slave models)
⊗	⊗	⊗	D	CLEAR condition with weak signal (not for slave models)
⊗ Blinking	⊗	⊗	–	Master in CLEAR, Slave in BREAK conditions (Master Models only)
⊗Blinking	⊗	⊗	D	Master in CLEAR, Slave in BREAK conditions with weak signal.(Master Models only)
⊗	⊗	⊗	–	GUARD condition
⊗	⊗	⊗	D	GUARD condition with weak signal
⊗	⊗	⊗		Receiver initialization
⊗	⊗	⊗	Code	FAIL condition – The type of fault is identified by the code number on display. See next “Fail condition tablel”

 

Fail condition

Display code	Meaning
O	Overload of the OSSD static outputs
F – C	Customer configuration rejected
F – 2	OSSD erroneously connectedt o 24VDC
F – E	External Feedback contactors missed
F – 3	Internal error
F – 4
F – A
F – 6	OSSD1 – OSSD2 short–circuit
F – 0	Overload of the OSSD static outputs (only for MASTER models)
F – 5	OSSD static outputs error
F – 1	Interfering dangerous Emitter detected. The receiver is able to receive simultaneously the beams from two different Emitters (30 sec)
F – U	SLAVE connections incorrect (only for MASTER models)
F – H	User configuration changed without system restart (only for MASTER models)

 

Receiver – VISION MXL

1 Three colour LED	S1 LED	S2 LED	MUT LED	OV LED	Meaning
⊗	⊗	⊗	⊗	⊗	System power-on – Initial TEST
⊗	⊗	⊗	⊗	⊗	First 5 s. Manual restart with Muting timeout = 30 s.
⊗	⊗	⊗	⊗	⊗	First 5 s. Manual restart with Muting timeout = 90 min.
⊗	⊗	⊗	⊗	⊗	First 5 s. Manual restart with Muting timeout = infinite
⊗	⊗	⊗	⊗	⊗	First 5 s. Automatic restart with Muting timeout = 30 s.
⊗	⊗	⊗	⊗	⊗	First 5 s. Automatic restart with Muting timeout = 90 min.
⊗	⊗	⊗	⊗	⊗	First 5 s. Automatic restart with Muting timeout = infinite.
⊗	⊗ ⊗ Status	⊗ ⊗ Status	⊗	⊗	BREAK condition
⊗	⊗	⊗	⊗	⊗	CLEAR condition. Waiting for restart
⊗	⊗ ⊗ Status	⊗ ⊗ Status	⊗	⊗	MUTING condition
⊗	⊗ ⊗ Status	⊗ ⊗ Status	⊗	⊗	GUARD condition
⊗	⊗ ⊗ Status	⊗ ⊗ Status	⊗	⊗	OVERRIDE condition
⊗	⊗ ⊗ Status	⊗ ⊗ Status	⊗	⊗ Blinking	OVERRIDE request with BREAK
⊗	⊗ ⊗ Status	⊗ ⊗ Status	⊗	⊗ Blinking	OVERRIDE request with S1 or S2

 

Configuration errors

1 Three colour LED	S1 LED	S2 LED	MUT LED	OV LED	Meaning
⊗ Blinking	⊗ Blinking	⊗ Blinking	⊗	⊗	OSSD output incorrectly connected to 24VDC
⊗ Blinking	⊗ Blinking	⊗	⊗ Blinking	⊗	Muting timeout incorrectly selected
⊗ Blinking	⊗	⊗ Blinking	⊗	⊗	Incorrect connection of pin FBK_K1K2/RESTART
⊗ Blinking	⊗ Blinking	⊗	⊗	⊗	Incorrect connection of pin OVERRIDE