VISION – Status display

Emitter – VISION V, VISION VXL, VISION MXL

1 Yellow LED 2 Red LED 3 Green LED Meaning
System power-on – Initial TEST
TEST condition
GUARD condition. Low range

Emitter – VISION VX

1 Yellow LED 2 Red LED 3 Green LED Display Meaning
8 System power-on – Initial TEST
L / H TEST condition
L GUARD condition. Low range
H GUARD condition. High range
  CODE FAIL condition – The type of fault is identified by the code number on display. See next “fail condition table”

Fail condition

Display code Meaning
F – P Range selection incorrect or modified
F – A Internal error (add-on board)
F – 3 Internal error (master board)
F – 4 Internal error

 

Receiver – VISION V, VISION VXL

1 Yellow LED 2 Red LED 3 Green LED 4 OSSD FAIL LED Meaning
System power-on – Initial TEST
Blinking Manual/automatic restart with feedback enabled/disabled. (VISION VXL models only)
BREAK condition
Received beam signal intensity is weak
GUARD condition

Receiver – VISION VX

1 Yellow LED 2 Red LED 3 Green LED Display Meaning
8 System power-on – Initial TEST
C C displayed for 10 sec. – Manual restart with feedback disabled (not for slave models)
C C displayed for 10 sec. – Manual restart with feedback enabled (not for slave models)
C C displayed for 10 sec. – Automatic restart with feedback disabled (not for slave models)
C C displayed for 10 sec. – Automatic restart with feedback enabled (not for slave models)

BREAK condition

D

BREAK condition with weak signal

CLEAR condition. Waiting for restart (not for slave models)

D

CLEAR condition with weak signal (not for slave models)
Blinking

Master in CLEAR, Slave in BREAK conditions (Master Models only)
Blinking 

D

Master in CLEAR, Slave in BREAK conditions with weak signal.(Master Models only)
GUARD condition
D GUARD condition with weak signal
  Receiver initialization
Code FAIL condition – The type of fault is identified by the code number on display. See next “Fail condition tablel”

 

Fail condition

Display code Meaning
O Overload of the OSSD static outputs
F – C Customer configuration rejected
F – 2 OSSD erroneously connectedt o 24VDC
F – E External Feedback contactors missed
F – 3 Internal error
F – 4
F – A
F – 6 OSSD1 OSSD2 shortcircuit
F – 0 Overload of the OSSD static outputs (only for MASTER models)
F – 5 OSSD static outputs error
F – 1 Interfering dangerous Emitter detected.
The receiver is able to receive simultaneously the beams from two different Emitters (30 sec)
F – U SLAVE connections incorrect (only for MASTER models)
F – H User configuration changed without system restart (only for MASTER models)

 

Receiver – VISION MXL

1 Three colour LED S1 LED S2 LED MUT LED OV LED Meaning
System power-on – Initial TEST
First 5 s. Manual restart with Muting timeout = 30 s.
First 5 s. Manual restart with Muting timeout = 90 min.
First 5 s. Manual restart with Muting timeout = infinite
First 5 s. Automatic restart with Muting timeout = 30 s.
First 5 s. Automatic restart with Muting timeout = 90 min.
First 5 s. Automatic restart with Muting timeout = infinite.

Status

Status
BREAK condition
CLEAR condition. Waiting for restart

Status
⊗ ⊗
Status
MUTING condition

Status

Status
GUARD condition

Status

Status
OVERRIDE condition

Status

Status
Blinking OVERRIDE request with BREAK

Status

Status
Blinking  OVERRIDE request with S1 or S2

 

Configuration errors

1 Three colour LED S1 LED S2 LED MUT LED OV LED Meaning
Blinking Blinking Blinking OSSD output incorrectly connected to 24VDC
Blinking Blinking Blinking Muting timeout incorrectly selected
Blinking Blinking Incorrect connection of pin FBK_K1K2/RESTART
Blinking Blinking Incorrect connection of pin OVERRIDE