Process plant
In process plants, many sensors are analogue: flow meters, level gauges, load cells, pressure switches, temperature gauges, and among them the
sensors that override the safety of the plant.
Mosaic modules with MA4 and MA2 analogue inputs according to the Machinery Directive 2006/42/EC, and the EN IEC 61508 series of standards, can be used in process plants, for SIS systems and SIF functions (see IEC 61511-1:2016).
![Port of Brsisbane](https://reer-stage.reersafety.com/wp-content/uploads/2023/12/Porto_Brisbane-1.webp)
Perimeter protection for access control in
harsh environmenrts
This safety solution, particularly suitable for large surfaces monitoring, often is installed in external areas exposed to atmospheric agents and in harsh operating conditions.
One of the requirements relating to safety in automated ports is the protection of access gates to areas where bridge cranes, platform cranes on rails and self-driving vehicles operate. In the picture the installation located in the port of Brisbane, Australia in the “AutoStrad™ Terminal”.
The safety solution in place is a combination of safety light curtains and physical fences with monitored gates. The objective is to prevent personnel from entering the “Container Handling and Storage Area” (Dangerous Area).
The different areas of the terminal are guarded by physical fences with gates controlled by interlocked safety locks.
![Industrial thermal process](https://reer-stage.reersafety.com/wp-content/uploads/2023/12/Termal-process-1.webp)
Industrial thermal process
Solutions for safety control of all applications where burners are used or, in general, in industrial thermal processes.
MOSAIC safety controller can be an ideal solution for safety control of all applications where burners are used or, in general, in industrial thermal processes.
Example: ovens, dryers for ceramic or cereals, shrink-sleeve wrappers & spreading lines, etc…