安全光幕:Type4,SIL3,SILCL3,PL e,Cat.4
横截面:50 x 55 mm
硬件配置:无需编程,易于安装和更换
通过M12连接器进行连接和配置
可使用高达100米的非屏蔽电缆连接安全光幕
盒子里的东西:主动TX/RX原件、被动后向反射器元件和标准紧固支架
带集成屏蔽功能和屏蔽灯的手掌防护安全光幕,可选自动/手动重启。内置用于外部继电器监控(EDM)的反馈输出,可编程
1390284
安全光幕:Type4,SIL3,SILCL3,PL e,Cat.4
横截面:50 x 55 mm
硬件配置:无需编程,易于安装和更换
通过M12连接器进行连接和配置
可使用高达100米的非屏蔽电缆连接安全光幕
盒子里的东西:主动TX/RX原件、被动后向反射器元件和标准紧固支架
安全水平 | 4级 - PL e |
防护区域高度(mm) | 760 |
分辨率(mm) | 30 |
受控高度(毫米) | 750 |
最大范围 (m) | 12 |
重启 | 用户可选自动或手动 |
光幕功能系统 | 发射器 - 接收器 |
安全等级(SIL / PL) | 4级 - SIL 3 - SILCL 3 - PL e - Cat. 4 |
工作温度 (°C) | -30到55 |
响应时间 (ms) | 12,5 |
光束数 | 38 |
最大连接电缆长度 (m) | |
屏蔽功能 | 内置 |
屏蔽逻辑 | T(双向)逻辑,带 2 个或 4 个传感器交叉或平行光束。L(单向)逻辑,带 2 个传感器交叉或平行光束 |
最大override超时 | 15分钟 |
集成屏蔽灯 | 是 |
屏蔽传感器 | 外部屏蔽传感器,带继电器或PNP暗通输出,屏蔽臂套件,屏蔽支架带M5传感器套件 |
信号显示 | 用于诊断、光幕状态和静音传感器状态的 LED 指示 |
安全输出型 | 2路故障安全PNP (400 mA, 24 VDC下),自控制,带短路、过载、奇偶性反向保护功能 |
连接 | M12 5针公接头(发射器),M12 12针公接头(接收器),M12 5针母接头(静音传感器)M12 5针母接头(编程和外部静音灯) |
MTTFD (ISO 13849-1) 年龄 | 162,5 |
安全输出数量 | 2路故障安全PNP (400 mA, 24 VDC下) |
安全功能 | |
检测距离 | 手掌 |
包装尺寸 W x H x L (mm) | |
可编程性 | |
产品分类 | B |
海关代码 | 85365019 |
电源 (VDC) | 24 ± 20% |
总高度 (mm) | 870 |
截面尺寸 (mm) | 50 x 55 |
防护等级 | IP 65 - IP 67 |
紧固方法 | 后部插槽,带一组LL型支架的侧插槽(随附)。SFB SG 旋转支架(可选) |
毛重 (g) |
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
安全光幕:Type4,SIL3,SILCL3,PL e,Cat.4
横截面:50 x 55 mm
硬件配置:无需编程,易于安装和更换
通过M12连接器进行连接和配置
可使用高达100米的非屏蔽电缆连接安全光幕
盒子里的东西:主动TX/RX原件、被动后向反射器元件和标准紧固支架
安全水平 | 4级 - PL e |
防护区域高度(mm) | 760 |
分辨率(mm) | 30 |
受控高度(毫米) | 750 |
最大范围 (m) | 12 |
重启 | 用户可选自动或手动 |
光幕功能系统 | 发射器 - 接收器 |
安全等级(SIL / PL) | 4级 - SIL 3 - SILCL 3 - PL e - Cat. 4 |
工作温度 (°C) | -30到55 |
响应时间 (ms) | 12,5 |
光束数 | 38 |
最大连接电缆长度 (m) | |
屏蔽功能 | 内置 |
屏蔽逻辑 | T(双向)逻辑,带 2 个或 4 个传感器交叉或平行光束。L(单向)逻辑,带 2 个传感器交叉或平行光束 |
最大override超时 | 15分钟 |
集成屏蔽灯 | 是 |
屏蔽传感器 | 外部屏蔽传感器,带继电器或PNP暗通输出,屏蔽臂套件,屏蔽支架带M5传感器套件 |
信号显示 | 用于诊断、光幕状态和静音传感器状态的 LED 指示 |
安全输出型 | 2路故障安全PNP (400 mA, 24 VDC下),自控制,带短路、过载、奇偶性反向保护功能 |
连接 | M12 5针公接头(发射器),M12 12针公接头(接收器),M12 5针母接头(静音传感器)M12 5针母接头(编程和外部静音灯) |
MTTFD (ISO 13849-1) 年龄 | 162,5 |
安全输出数量 | 2路故障安全PNP (400 mA, 24 VDC下) |
安全功能 | |
检测距离 | 手掌 |
包装尺寸 W x H x L (mm) | |
可编程性 | |
产品分类 | B |
海关代码 | 85365019 |
电源 (VDC) | 24 ± 20% |
总高度 (mm) | 870 |
截面尺寸 (mm) | 50 x 55 |
防护等级 | IP 65 - IP 67 |
紧固方法 | 后部插槽,带一组LL型支架的侧插槽(随附)。SFB SG 旋转支架(可选) |
毛重 (g) |
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here