2路非等价输出
推挽输出可在PNP和NPN模式下工作。在通电时,光栅识别负载的连接类型,并相应地操作
光幕和接口之间的最大长度连接电缆:100 m
测量光幕。固态输出
1250364
2路非等价输出
推挽输出可在PNP和NPN模式下工作。在通电时,光栅识别负载的连接类型,并相应地操作
光幕和接口之间的最大长度连接电缆:100 m
受控高度(毫米) | 720 |
最大范围 (m) | |
工作温度 (°C) | -10到55 |
光束数 | |
信号显示 | 用于指示光幕状态和诊断的 LED |
连接 | M12,5芯连接器(发射器 - 接收器) |
输出 | 2 – 非等价固态0或24V数字量输出(推挽式) |
包装尺寸 W x H x L (mm) | |
产品分类 | C |
海关代码 | 85365019 |
输出类型 | 2 – 非等价固态0或24V数字量输出(推挽式) |
电源 (VDC) | 24 ± 20% |
光束间距 (mm) | 30 |
总高度 (mm) | 813 |
截面尺寸 (mm) | 28 x 30 |
防护等级 | IP 65 - IP 67 |
紧固方法 | 带一组 LE 型支架的后槽(随附)或顶部和下端,带旋转支架 SFB E(可选) |
毛重 (g) |
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
2路非等价输出
推挽输出可在PNP和NPN模式下工作。在通电时,光栅识别负载的连接类型,并相应地操作
光幕和接口之间的最大长度连接电缆:100 m
受控高度(毫米) | 720 |
最大范围 (m) | |
工作温度 (°C) | -10到55 |
光束数 | |
信号显示 | 用于指示光幕状态和诊断的 LED |
连接 | M12,5芯连接器(发射器 - 接收器) |
输出 | 2 – 非等价固态0或24V数字量输出(推挽式) |
包装尺寸 W x H x L (mm) | |
产品分类 | C |
海关代码 | 85365019 |
输出类型 | 2 – 非等价固态0或24V数字量输出(推挽式) |
电源 (VDC) | 24 ± 20% |
光束间距 (mm) | 30 |
总高度 (mm) | 813 |
截面尺寸 (mm) | 28 x 30 |
防护等级 | IP 65 - IP 67 |
紧固方法 | 带一组 LE 型支架的后槽(随附)或顶部和下端,带旋转支架 SFB E(可选) |
毛重 (g) |
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here