紧凑型安全光幕,2级,SIL1, SILCL1, PL c, Cat. 2
横截面:28 x 30 mm
一侧无盲区
硬件配置:无需编程,易安装和更换
通过M12连接器进行连接和配置
采用最长达100 m的非屏蔽电缆连接安全光幕
盒子里的东西:发射器、接收器、标准的紧固支架
可以串联连接的身体防护安全光幕,可选自动/手动重启。内置用于外部继电器监控(EDM)的反馈输入(从站2型号)。
1320479
紧凑型安全光幕,2级,SIL1, SILCL1, PL c, Cat. 2
横截面:28 x 30 mm
一侧无盲区
硬件配置:无需编程,易安装和更换
通过M12连接器进行连接和配置
采用最长达100 m的非屏蔽电缆连接安全光幕
盒子里的东西:发射器、接收器、标准的紧固支架
安全水平 | 2级 - PL c |
防护区域高度(mm) | 1810 |
分辨率(mm) | 50 |
受控高度(毫米) | 1800 |
最大范围 (m) | 12 |
重启 | 用户可选自动或手动 |
光幕功能系统 | 发射器 - 接收器 |
主从型号 | 是 |
安全等级(SIL / PL) | 2级 - SIL 1 - SILCL 1 - PL c – Cat. 2 |
工作温度 (°C) | -30到55 |
响应时间 (ms) | 参见技术手册 |
光束数 | 48 |
最大连接电缆长度 (m) | 100(主从站之间50) |
信号显示 | 用于指示光幕状态和诊断的 LED |
安全输出型 | 2路故障安全PNP (400 mA, 24 VDC下),自控制,带短路、过载、奇偶性反向保护功能 |
连接 | M12,5芯连接器 |
MTTFD (ISO 13849-1) 年龄 | 188,9 |
安全输出数量 | 2 OSSD PNP ( 400 mA, 24 VDC 下) |
安全功能 | |
检测距离 | 身体 |
包装尺寸 W x H x L (mm) | |
产品分类 | C |
海关代码 | 85365019 |
材料装运 | 10 天 |
电源 (VDC) | 24 ± 20% |
总高度 (mm) | 1886,5 |
截面尺寸 (mm) | 28 x 30 |
防护等级 | IP 65 - IP 67 |
紧固方法 | 带一组 LE 型支架的后槽(随附)或顶部和下端,带旋转支架 SFB E(可选) |
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
紧凑型安全光幕,2级,SIL1, SILCL1, PL c, Cat. 2
横截面:28 x 30 mm
一侧无盲区
硬件配置:无需编程,易安装和更换
通过M12连接器进行连接和配置
采用最长达100 m的非屏蔽电缆连接安全光幕
盒子里的东西:发射器、接收器、标准的紧固支架
安全水平 | 2级 - PL c |
防护区域高度(mm) | 1810 |
分辨率(mm) | 50 |
受控高度(毫米) | 1800 |
最大范围 (m) | 12 |
重启 | 用户可选自动或手动 |
光幕功能系统 | 发射器 - 接收器 |
主从型号 | 是 |
安全等级(SIL / PL) | 2级 - SIL 1 - SILCL 1 - PL c – Cat. 2 |
工作温度 (°C) | -30到55 |
响应时间 (ms) | 参见技术手册 |
光束数 | 48 |
最大连接电缆长度 (m) | 100(主从站之间50) |
信号显示 | 用于指示光幕状态和诊断的 LED |
安全输出型 | 2路故障安全PNP (400 mA, 24 VDC下),自控制,带短路、过载、奇偶性反向保护功能 |
连接 | M12,5芯连接器 |
MTTFD (ISO 13849-1) 年龄 | 188,9 |
安全输出数量 | 2 OSSD PNP ( 400 mA, 24 VDC 下) |
安全功能 | |
检测距离 | 身体 |
包装尺寸 W x H x L (mm) | |
产品分类 | C |
海关代码 | 85365019 |
材料装运 | 10 天 |
电源 (VDC) | 24 ± 20% |
总高度 (mm) | 1886,5 |
截面尺寸 (mm) | 28 x 30 |
防护等级 | IP 65 - IP 67 |
紧固方法 | 带一组 LE 型支架的后槽(随附)或顶部和下端,带旋转支架 SFB E(可选) |
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here