Die MR2-Erweiterungsgeräte benötigen kein MSC, da sie direkt mit dem ausgewählten OSSD verkabelt werden
Sicherheitsstand | PL e |
Sicherheitsstufe (SIL / PL) | SIL 3 - SILCL 3 - PL e - Kat. 4 |
Betriebstemperatur (°C) | Von -10 bis 55 |
Signaltechnik | LED-Anzeige für Betriebszustand und Fehlerdiagnose. LED-Anzeige des Eingangszustands |
Anschlüsse | Entfernbare Klemmleisten, Kontaktschrauben |
MTTFD (ISO 13849-1) Jahren | The values depend on the type of use. Refer to the technical manual |
Sicherheitsrelaisausgänge | 2 NO + 1 NC (6A bei 250 VAC) |
Lagertemperatur (°C) | -20 ... +85 |
Gehäuse für MCM | Nein |
USB input | Nein |
Abmessungen der Box | |
Produktklasse | A |
Zollcode | 8536490 |
Strom (VDC) | 24 ± 20% |
Abmessungen HxBxT (mm) | 108 x 22,5 x 114,5 |
Schutzgrad | IP 20 für Gehäuse - IP 2X für Klemmleiste |
Befestigung | Schienenbefestigung nach EN 50022-35 Norm |
Bruttogewicht (g) |
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
Die MR2-Erweiterungsgeräte benötigen kein MSC, da sie direkt mit dem ausgewählten OSSD verkabelt werden
Sicherheitsstand | PL e |
Sicherheitsstufe (SIL / PL) | SIL 3 - SILCL 3 - PL e - Kat. 4 |
Betriebstemperatur (°C) | Von -10 bis 55 |
Signaltechnik | LED-Anzeige für Betriebszustand und Fehlerdiagnose. LED-Anzeige des Eingangszustands |
Anschlüsse | Entfernbare Klemmleisten, Kontaktschrauben |
MTTFD (ISO 13849-1) Jahren | The values depend on the type of use. Refer to the technical manual |
Sicherheitsrelaisausgänge | 2 NO + 1 NC (6A bei 250 VAC) |
Lagertemperatur (°C) | -20 ... +85 |
Gehäuse für MCM | Nein |
USB input | Nein |
Abmessungen der Box | |
Produktklasse | A |
Zollcode | 8536490 |
Strom (VDC) | 24 ± 20% |
Abmessungen HxBxT (mm) | 108 x 22,5 x 114,5 |
Schutzgrad | IP 20 für Gehäuse - IP 2X für Klemmleiste |
Befestigung | Schienenbefestigung nach EN 50022-35 Norm |
Bruttogewicht (g) |
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here